fiber-optics

Efficient use of fiber optics

/0 Comments/in /by

Fiber optics

These days Fiber optics cables being used in almost every network service company whether it’s a small local agency or a big network service provider. The latest high speed fiber optic wires are capable of providing lightning speed in a very decent cost. In every household these cables are used to connect telecommunication and internet connection. There are several mechanisms used by the operators to establish a strong connection through fiber optics.

fiber optics

fiber optics

The main phases of a well established fiber optic connection are handling, cabling, and installation which requires several operations and some machines like cable blowing machines, air blowing machine, etc. according to the new standards of ANSI there are many safety measures which you have to follow while installing a fiber optic connection in an area. While installing the connection the machines and fiber optic wires have to be tested through several standardized processes.
The main reason of using fiber optic cable is the reliable quality and super fast data transmission rate. In case of long distance connection between server and local agency or household this special optical able serve very efficiently. The main types of optical fiber are conductive, non-conductive, general use, plenum, conductive rise and many more. The price of optic fiber depends on the quality and speed of data transfer.

 

An efficient fiber optic connection installation needs many considerations and use of expensive machines. Most of the fiber optic connections are established mainly through underground channels which needs tricks and exact machines to accomplish the job.

Aire máquina de soplado

/0 Comments/in /by

Aire máquina de soplado de 1 mm hasta 30 mm de cables de fibra óptica lleva a cabo el proceso de soplado. Cuanto mayor sea el aire suministrado al tubo durante esta operación tan cómoda operación de soplado cable se realiza. Por ejemplo, use un compresor de aire para soplar 8bar está aquí y le gustaría un cable de fibra óptica de 12 mm de 32 mm de la tubería. Usted no puede producir un alto nivel. Debido a que el diámetro de la tubería crece, vale la pena señalar que la cantidad de aire que se insufla en la tubería. Por lo tanto, el cable de fibra óptica a la fricción es proporcional a la cantidad de aire suministrado a la tubería. Si utiliza un compresor de 12 bar en las mismas condiciones, en proceso de soplado será más largo y más fácil. Nuestra recomendación sería utilizar un mínimo de 12 bar compresor.

Aire máquina de soplado You can comment below for more information. Our team will respond as soon as possible.

Note

We suggest minimum 12 BAR 10.5 m^3 / minutes air compressor for better results.

Air blowing machine

/0 Comments/in /by

Air blowing machine can blow from 1mm up to 30mm fiber optic cables performs the blowing process. The greater the air supplied to the tube during this operation so comfortable cable blowing operation is performed.

For example, use an air compressor to blow 8bar is here and would like a pipe 32mm 12mm fiber optic cable. You may not yield a high level. Because the pipe diameter grows, it is worth noting that the amount of air to be blown into the pipe. So, the fiber optic cable to friction is proportional to the amount of air supplied to the pipe.

If you use a 12 bar compressor under the same conditions lead to blowing process will be longer and easier. Our recommendation would be to use a minimum of 12 bar compressor. (It depend on your fiber cable diameters!)

Air blowing machine

You can comment below for more information. Our team will respond as soon as possible.

Note

We suggest minimum 12 BAR 10.5 m^3 / minutes air compressor for better results.

Blown fibre installation

/0 Comments/in /by

What is Blown fibre installation

Blown fiber to the right target through the pre-loaded tubes ‘coup’ life is a process that is used to install the fiber optic core with compressed air. Less breakage, stress and wasted this system results in significantly reduces the cost of creating the network. It also provides a more flexible design and large capital expenditure and has better reliability while helping to minimize network planning easy.

for more information you can contact us.

Blown fibre installation

Blowing Machines

/6 Comments/in /by

Blowing Machines

The most important point is blowing machines ! If your machine give strong air to the duct it will be better.

Fiber optic blowing machine is used for blowing fiber cables completely. Firstly you need to check your cable diameters for selection of the right machine. If you prefer your cable diameter suitable machine you will get very good results.

Secondly, it is vital to the air compressor. Because your cable blowing process have much air pressure it will be easier to blowing fibres.

In mind all this information will make your fiber optic blowing process ends successfully for your job.

Our custom solution for you, please contact us for more informaitons. Our contact centers open 24/7.

OFC Blowing Machines

/0 Comments/in /by

OFC Blowing Machines

OFC Blowing Machines from ALLAME MAKINA .

MicroSKY : Can blow between diameters from 1mm to 4mm.

MiniSKY : Can blow between diameters from 4mm to 12mm.

SkyJET : Can blow between diameters from 8mm to 22mm.

HydroSKY : Can blow between diameters from 9mm to 30mm optical fibres. Also you can blow multi cables or tubes with this machine. We’ll give you with hydraulic power pack included the machine. You can get extra power with this machine.

Note : All of our machines are our own manufacturing.

تركيب الألياف البصرية

تركيب الألياف البصرية

/0 Comments/in /by

تركيب الألياف البصرية

fiber optic installation

fiber optic installation

وينبغي أن يكون تركيب كابل الألياف البصرية كابل آلات النفخ. تسبب قوة الإنسان يمكن تقسيم كابل الألياف. عند استخدام ضاغط قوي على أن نقترح دقيقة 12 شريط 10.mt ^ 3 / دقيقة. لذلك سوف يكون أفضل. إذا كان لديك سؤال يمكنك أن تسأل!

تركيب الألياف البصرية

Fiber optic installation

/0 Comments/in /by

Fiber optic installation

fiber optic installation

fiber optic installation

Fiber Optic cable installation should be cable blowing machines. Cause the human power can be broken the fiber cable. When you use the strong compressor that we suggest min 12 bar 10.mt^3/min. So it will be better. If you have question you can ask!

Cable Blowing Machine Price

Cable Blowing Machine Price

/40 Comments/in /by

Cable Blowing Machine Price!

Manufacturer and supplier of the most innovative design fish tape, cable blowing machine, blowing ofc, fiber optic cable channels and embedded channels for faster and easier installation of wire and cable machinery, cable channels and Fiber  blowers. (cable blowing machine price)

Cable Blowing Machine Price

Cable Blowing Machine Price

The installation of network with fiber optic cable needs specialized machines in use. Most of the operators who deal with huge projects of fiber optic within an area or building generally use Fibre optic cable blowing machine which is the most recent and latest technology of installing a network effectively. Previously, manuallabor was needed to establish a long distance underground network of fiber optic cable to establish a telecommunication channel, but with changing technology, there are several machines came into the picture which is capable to handle any distance or complex installation with less human effort.

Fiber optic cable is known as the most reliable and powerful cable which used in high speed data transfer. The main technology is quite different than other cables. When this cable need to be passed through the secured duct in the network it needs especial optic cable blowers which handle the cable efficiently and keep the cable safe from other hazards. Keeping it mind an air blowing machine or jet machine have the control of air compressor which is applied, depending upon the need of speed in the fiber optic blowing process. – cable blowing machine price.

There are different types of fiber optic cables are in use in the commercial telecommunication purposes. The speed, cable layers also vary from one kind to another.  Fibre optic cable blowing machine gives the power to control the pressure of air by controlling the hydraulic motor speed. There are many types of blowing machines with cable blowing machine price available and used depending on the volume of the installation.

Cable blowing machine price.

Fiber optic cable installation equipment

/2 Comments/in , , , , , , /by

Why fiber optic cable blowing machines or Fiber optic cable installation equipment?

Fiber optic tools is a high incidence of problems arising: their poor design, misuse, strangeness is the source of all problems during installation or use with their plight. Read more